Quick Die Change System

Home > Products > Q.D.C.S. - Quick Die Change System > Quick Die Change System Component > Clamper > TY Die Clamp

TY Die Clamp

Quick Die Change System - TY Die Clamp

Patent Number: ZL 01 2 67208.4

Because this lever-type clamp does not require a U-cut on the die shoe, it may be used in a wide range of applications. The base of the clamp is machined to fit the T-slot on the bolster. The flange-mount model clamp may be bolted onto the bolster. The automatic slidermodel makes remote control possible.

Specifications :

Model	Unit	TX2	TX4	TX6	TX10	TX16	TX25
Tons Clamping (at 250kgf/cm²)	tons	2	4	6.3	10	16	25
Full Stroke (X)	mm	7	7	8	8	8	8
Clamping Stroke (Y)	mm	2	3	4	3	3	3
Extra Stroke (Z)	mm	5	4	4	5	5	5
Cylinder Capacity at Full Stroke	cc	6.5	13.2	22.3	37	61	93

Physical Dimensions :
Structure Section :

* Notes: Clamps with a dimension greater than Max. h+d are also optionally acailable.

Physical Dimensions :

Die Shoe Thickness (h) Classify : 25, 30, 35, 40, 45, 50, 55, 60 m/m

Quick Die Change System - Physical Dimensions

Model	MIN.E	F	G	J	K	L	MAX.N	P	R	MIN.S	PT	MIN.C	Model	a	b	c	d
TY2	59	65	28	22	85	107	10	12.5	48	27	1/8	9.5	TY2	22	37	16	24
TY4	85	87	40	30	120	150	10	16	58	33	1/4	12	TY4	22	37	16	24
TY6	94	97	44	34.5	133	167.5	11	20	68	40	1/4	14	TY6	28	48	20	28
TY10	105	110	50	30	165	195	11	20	82	53	1/4	16.5	TY10	28	48	20	28
TY16	120	125	60	35	200	235	12	20	96	67	1/4	19	TY16	28	48	23	28
TY25	133	155	73	35	240	275	13	20	110	81	1/4	22	TY25	36	56	25	28

Notes :

Clamps with a dimension greater than Max. h+d are also optionally available.
Specify T-slot dimensions (a.b.c.d) and clamping height (h) when ordering.
Clamping strokes and extra strokes are for standard models; custom strokes available on request.

Page Top