Quick Die Change System

Home > Products > Q.D.C.S. - Quick Die Change System > Quick Die Change System Component > Clamper > TX Die Clamp

TX Die Clamp

Quick Die Change System - TX Die Clamp

Patent Number: ZL 01 2 67208.4

Because this lever-type clamp does not require a U-cut on the die shoe.it may be used in a wide range of applications. The base of the clamp is machined to fit the T-slot on the bolster.

Specifications :

Model	Unit	TX2	TX4	TX6	TX10	TX16	TX25
Clamping Force (at 250kgf/cm²)	tons	2	4	6.3	10	16	25
Full Stroke	mm	8	8	8	8	8	8
Clamping Stroke	mm	4	3	3	3	3	3
Extra Stroke	mm	4	5	5	5	5	5
Capacity at Full Stroke	cc	6.5	13	21	32	54	84

Die Shoe Thickness "U" Slot :
Structure Section :

* Notes: Clamps with a dimension greater than Max. h+d are also optionally acailable.

Physical Dimensions :

Die Shoe Thickness (h) Classify : 25, 30, 35, 40, 45, 50, 55, 60 m/m

Quick Die Change System - Physical Dimensions

Model	E	F	G	H	K	MIN.C	PT	Model	A	B	C	D
TX2	49	52	18	38	12	8	1/8	TX2	22	37	16	24
TX4	68	60	25	59	15	10	1/4	TX4	22	37	16	24
TX6	78	65	30	64	16	14	1/4	TX6	28	48	20	28
TX10	98	71	40	79	16	17	1/4	TX10	28	48	20	28
TX16	127	78	50	88	16	20	1/4	TX16	28	48	23	28
TX25	148	100	60	98	15	23	1/4	TX25	36	56	25	28

Notes :

Clamps with a dimension greater than Max. h+d are also optionally available.
Specify T-slot dimensions (a.b.c.d) and clamping height (h) when ordering.
Clamping strokes and extra strokes are for standard models; custom strokes available on request.

Page Top

Relative Products :