Quick Die Change, Press Machine - Quick Die Change System
Home > Quick Die Change System > System Introduction
Q.D.C.S Quick Die Change System
Control Panel
 |
The control panel offers an interface to monitor and control operations of the quick mold change system. The upper half of the screen displays automatic functions while the lower half is used for operator-controlled functions. |
Die Clamp
 |
Because this lever-type clamp does not require a U-cut on the die shoe.it may be used in a wide range of applications. The base of the clamp is machined to fit the T-slot on the bolster. |
Die Lifter Series
 |
The hydraulic DL DIE LIFTER withstands heavy load weights and abuse. The scrap guard/scrapers keep the roller surfaces free from scraps. The rollers are arrayed in closer pitches to prevent damage to the bottom of heavy dies. The height of the roller can be adjusted by removing some of the built-in shims with different thicknesses. |
Die Arm Series
 |
The bolster extenstion makes it easy to move the dues to an accessible area of the press for convenient die changing with a crane or forklift truck. Available in three different designs: detachable RC series, drop-down RD series(alternate model), and folding RE/RF series. |
Power Unit
 |
|