Quick Die Change, Press Machine - Die Lifter Series

Home > Quick Die Change System > System Introduction > Die Lifter Series

Quick Die Change, Press Machine - Die Lifter Series

DR Die Lifter

These spring-loaded rollers easily fit to different-sized T-or U-slots on the bolster by adding the spacers to the side walls of the rollers. As rollers are available in standard lengths of 200mm and 300mm, any roller length can be constructed by combining these standard lengths in increments of 100mm.

Patent Number：ZL 01 2 64424.2

Quick Die Change, Press Machine - Die Lifter Series

DR Diagram

Quick Die Change, Press Machine - Die Lifter Series

Model a H  
DR-22 22 33-43  
DR-28 28 45-58  


DR Specifications

Basic Model
 Width (mm) Length (mm) Springs (pcs) Lift Farce (kgf)
DRL-22-200/DRB22-200 22 200 4 37.5
DRL-22-300/DRB22-300 22 300 6 37.5
DRL-28-200/DRB28-200 28 200 4 75
DRL-28-300/DRB28-300 28 300 6 75

Quick Die Change, Press Machine - Die Lifter Series

Maximum lift force per line (kgf)

Quick Die Change, Press Machine - Die Lifter Series 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
DR-22 150 225 300 375 450 525 600 675 750 825 900 975 1050 1125 1200 1275 1350 1425 1500
DR-28 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950 2100 2250 2400 2550 2700 2850 3000

DU Die Lifter

Quick Die Change, Press Machine - Die Lifter Series

  DU100 DU200
A 38+0-0.05 45+0-0.05
B 38 45
C 35+0-0.05 42+0-0.05
S 3 3
W 100kgf 200kgf

DL Die Lifter ( Roller Type)

The hydraulic DL DIE LIFTER withstands heavy load weights and abuse. The scrap guard/scrapers keep the roller surfaces free from scraps. The rollers are arrayed in closer pitches to prevent damage to the bottom of heavy dies. The height of the roller can be adjusted by removing some of the built-in shims with different thicknesses.

Patent Number：ZL 01 2 68229.2

Quick Die Change, Press Machine - Die Lifter Series

DL-28

Quick Die Change, Press Machine - Die Lifter Series

Model Overall Roller Q'ty Load Capacity Lift Cylinder (kg) Lift Cylinder Pitch (mm)
Pcs Lift Farce P1 P2 P3 P4 P5 P6 P7
DL-28-400 400 7 560 2 1000 300            
DL-28-500 500 9 720 3 1500 90 310          
DL-28-600 600 11 880 4 2000 100 340 60        
DL-28-700 700 13 1040 4 2000 150 350 100        
DL-28-800 800 15 1200 5 2500 95 95 390 120      
DL-28-900 900 17 1360 5 2500 110 110 410 170      
DL-28-1000 1000 19 1520 6 3000 130 130 420 110 110    
DL-28-1100 1100 21 1680 6 3000 150 150 460 120 120    
DL-28-1200 1200 23 1840 7 3500 100 150 150 200 200 200  
DL-28-1300 1300 25 2000 7 3500 150 150 300 300 150 150  
DL-28-1400 1400 27 2160 8 4000 100 100 150 150 200 250 350
DL-28-1500 1500 29 2320 8 4000 100 100 150 150 200 350 350

DL-50

Quick Die Change, Press Machine - Die Lifter Series

Model Overall Roller Q'ty Load Capacity Lift Cylinder (kg) Lift Cylinder Pitch (mm)
Pcs Lift Farce P1 P2 P3 P4 P5 P6 P7
DL-50-400 400 4 800 2 2200 280
DL-50-500 500 5 1000 3 3300 90 290          
DL-50-600 600 6 1200 4 4400 90 330 60        
DL-50-700 700 7 1400 4 4400 140 340 100        
DL-50-800 800 8 1600 4 4400 170 390 120        
DL-50-900 900 9 1800 4 4400 210 400 170        
DL-50-1000 1000 10 2000 5 5500 125 125 410 220      
DL-50-1100 1100 11 2200 5 5500 150 150 400 280      
DL-50-1200 1200 12 2400 5 5500 150 150 400 380      
DL-50-1300 1300 13 2600 6 6600 150 150 200 400 280    
DL-50-1400 1400 14 2800 6 6600 150 150 200 400 380    
DL-50-1500 1500 15 3000 7 7700 150 150 200 300 300 280  
DL-50-1600 1600 16 3200 7 7700 100 150 250 400 300 280  
DL-50-1700 1700 17 3400 8 8800 100 100 150 250 300 300 380
DL-50-1800 1800 18 3600 8 8800 100 100 150 250 300 300 480
Note: For purchases please attach a bolster plate diagram for correct sizing of the waste material hole at the bottom.

DB Die Lifter（Ball Type）

The hydraulic DB Die Lifter employs universal bearings for superior forward and reverse, left and right motion of molds in and out of press machines.

DB-28 (DB-28 for Dies 800kg or Less)

Quick Die Change, Press Machine - Die Lifter Series

Model Overall Ball Q'ty Lift Cylinder (kg) Lift Cylinder Pitch (mm)
Pcs Lift Farce P1 P2 P3 P4 P5 P6 P7
DB-28-400 400 7 2 1000 300            
DB-28-500 500 9 3 1500 90 310          
DB-28-600 600 11 4 2000 100 340 60        
DB-28-700 700 13 4 2000 150 350 100        
DB-28-800 800 15 5 2500 95 95 390 120      
DB-28-900 900 17 5 2500 110 110 410 170      
DB-28-1000 1000 19 6 3000 130 130 420 110 110    
DB-28-1100 1100 21 6 3000 120 120 460 150 150    
DB-28-1200 1200 23 7 3500 300 200 200 150 150 100  
DB-28-1300 1300 25 7 3500 150 150 300 300 150 150  
DB-28-1400 1400 27 8 4000 350 250 200 150 150 100 100
DB-28-1500 1500 29 8 4000 350 350 200 150 150 100 100
Note: For purchases please attach a bolster plate diagram for correct sizing of the waste material hole at the bottom.

DB-50 (DB-50 for Dies 800~1500kg)

Quick Die Change, Press Machine - Die Lifter Series

Model Overall Ball Q'ty Lift Cylinder (kg) Lift Cylinder Pitch (mm)
Pcs Lift Farce P1 P2 P3 P4 P5 P6 P7
DB-50-400 400 7 2 2200 280            
DB-50-500 500 9 3 3300 90 290          
DB-50-600 600 11 4 4400 90 330 60        
DB-50-700 700 13 4 4400 140 340 100        
DB-50-800 800 15 4 4400 170 390 120        
DB-50-900 900 17 4 4400 210 400 170        
DB-50-1000 1000 19 5 5500 125 125 410 220      
DB-50-1100 1100 21 5 5500 150 150 400 280      
DB-50-1200 1200 23 5 5500 150 150 400 380      
DB-50-1300 1300 25 6 6600 150 150 200 400 280    
DB-50-1400 1400 27 6 6600 150 150 200 400 380    
DB-50-1500 1500 29 7 7700 150 150 200 300 300 280  
DB-50-1600 1600 31 7 7700 100 150 250 400 300 280  
DB-50-1700 1700 33 8 8800 100 100 150 250 300 300 380
DB-50-1800 1800 35 8 8800 100 100 150 250 300 300 480
Note: For purchases please attach a bolster plate diagram for correct sizing of the waste material hole at the bottom.

DB-80 (DB-80 for Dies 1500kg or More)

Quick Die Change, Press Machine - Die Lifter Series

Model Overall Ball Q'ty Load Cap Lift Cylinder (kg) Lift Cylinder Pitch (mm) Margin
L Pcs Lift Farce P1 P2 P3 P4 P5 P6 P7 C
DB-80-400 400 4 800 3 3300 140 140           87.5
DB-80-500 500 6 1200 3 3300 190 190           62.5
DB-80-600 600 7 1400 4 4400 125 230 125         75
DB-80-700 700 8 1600 4 4400 125 330 125         87.5
DB-80-800 800 10 2000 6 6600 125 125 180 125 125     62.5
DB-80-900 900 11 2200 6 6600 125 125 280 125 125     75
DB-80-1000 1000 12 2400 6 6600 125 125 380 125 125     87.5
DB-80-1100 1100 14 2800 8 8800 125 125 125 230 125 125 125 62.5
DB-80-1200 1200 15 3000 8 8800 125 125 125 330 125 125 125 75
DB-80-1300 1300 16 3200 8 8800 125 125 125 430 125 125 125 87.5
DB-80-1400 1400 18 3600 10 11000 125 125 125 125 280 125 125 62.5
DB-80-1500 1500 19 3800 10 11000 125 125 125 125 380 125 125 75
DB-80-1600 1600 20 4000 10 11000 125 125 125 125 480 125 125 87.5
DB-80-1700 1700 22 4400 12 13200 125 125 125 125 125 330 125 62.5
Note: For purchases please attach a bolster plate diagram for correct sizing of the waste material hole at the bottom.

DB-80

Model Overall Ball Q'ty Load Cap Lift Cylinder (kg) Lift Cylinder Pitch (mm) Margin
L Pcs Lift Farce P8 P9 P10 P11 C
DB-80-400 400 4 800 3 3300         87.5
DB-80-500 500 6 1200 3 3300         62.5
DB-80-600 600 7 1400 4 4400         75
DB-80-700 700 8 1600 4 4400         87.5
DB-80-800 800 10 2000 6 6600         62.5
DB-80-900 900 11 2200 6 6600         75
DB-80-1000 1000 12 2400 6 6600         87.5
DB-80-1100 1100 14 2800 8 8800         62.5
DB-80-1200 1200 15 3000 8 8800         75
DB-80-1300 1300 16 3200 8 8800         87.5
DB-80-1400 1400 18 3600 10 11000 125 125     62.5
DB-80-1500 1500 19 3800 10 11000 125 125 125 125 75
DB-80-1600 1600 20 4000 10 11000 125 125 125 125 87.5
DB-80-1700 1700 22 4400 12 13200 125 125 125 125 62.5
Note: For purchases please attach a bolster plate diagram for correct sizing of the waste material hole at the bottom.
Copyright © FORWELL PRECISION MACHINERY CO., LTD.
Tel: +886-4-834-5196 / Fax: +886-4-834-5197 / Address: No.399, Sec. 2, Mingsheng Rd., Pusin Township, Changhua County 513, Taiwan