Die Cart - Pressure Clampers
Home > Die/Mold Cart System > Pressure Clamps > Pressure Clampers
Pressure Clampers
Uses air driven with spring and accentric cam to clamp the mold.
| Model | TFH-10 | TFH-16 | TFH-25 | TFH-40 | |
| Clamping Farce | 98 | 157 | 245 | 310 | |
| Fixed pressure (kN) | 0.39MPa Air pressurea | 98 | 157 | 245 | 310 |
| 0MPa Air pressure | 26.5 | 40.9 | 65 | 83 | |
| Clamping force (kN) | 0.49MPa Air pressure | 75.5 | 124 | 190 | 258 |
| 0.39MPa Air pressure | 63.7 | 104 | 160 | 235 | |
| 0MPa Air pressure | 14.7 | 23.5 | 35 | 52 | |
| Full stroke (mm) | 2.8 | 3 | 3.3 | 4 | |
| Clamping stroke (mm) | 1.2 | 1.2 | 1.3 | 1.5 | |
| Safety stroke (mm) | 1.6 | 1.8 | 2 | 2.5 | |
| Cylinder capacity (cm)3 | Clamping | 773 | 1334 | 2468 | 4250 |
| Release | 729 | 1262 | 2346 | 2780 | |
| Pressure (MPa) | (MPa)Air pressure | 0.49 | |||
| (MPa)Air pressure | 0.39 | ||||
| Work temperature | 70°C | ||||
| Using frequency | 20/day | ||||
Dimensions
| Model | E | FA | FB | FC | G | J | K | L | MA | MB |
| TFH-10 | 156 | 135 | 95 | 130 | 48 | 19 | 164.5 | 299.5 | 119 | 115.5 |
| TFH-16 | 182 | 142 | 104 | 160 | 55 | 23 | 203 | 360 | 128 | 132 |
| TFH-25 | 227 | 170 | 130 | 190 | 65 | 25 | 253 | 434 | 158 | 167 |
| TFH-40 | 247 | 200 | 146 | 210 | 80 | 25 | 253 | 454 | 170 | 178 |
| Model | N | P | MIN.Q | R | S | T | U | W | X | Z | H |
| TFH-10 | 8.5 | 11 | 163.5 | 3 | 98.5 | 13 | 32.5 | 36 | M12 | 6 | 40±0.3 |
| TFH-16 | 12 | 13 | 203 | 5 | 100.5 | 17 | 40 | 30 | M20 | 6 | 40±0.3 |
| TFH-25 | 12 | 17 | 245 | 5 | 125.5 | 20 | 50 | 37 | M24 | 10 | 50±0.3 |
| TFH-40 | 15 | 17 | 255 | 5 | 145.5 | 27 | 60 | 37 | M30 | 20 | 50±0.3 |
Relative Product: