Die Cart - Fixed Clampers
Home > Die/Mold Cart System > Pressure Clamps > Fixed Clampers
Fixed Clampers
Uses air driven with spring and accentric cam to clamp the mold.
| Model | TFL1L | TFL2.5L | TFL4L | TFL6L | TFL110L | TFL16L | |
| Tons Clamping (Ton) | hydraulic pressure 140kgf/cm2 | 1 | 2.5 | 4 | 6.3 | 10 | 16 |
| hydraulic pressure 0kgf/cm2 | 0.05 | 0.1 | 0.16 | 0.25 | 0.4 | 0.6 | |
| Full Stroke (mm) | 3.5 | 4 | 4 | 4 | 4.5 | 4.5 | |
| Clamping Stroke Y (mm) | 2 | 2 | 2 | 2 | 2 | 2. | |
| Extra Stroke Z (mm) | 1.5 | 2 | 2 | 2 | 2.5 | 2.5 | |
| Cylinder Capacity st Full Stroke | when clamping (cm3) | 15 | 41 | 92 | 163 | 298 | 470 |
| when unclamping (cm3) | 6 | 11 | 28 | 48 | 87 | 143 | |
Dimensions
| Model | E | F | L | M | N | R | S | U | V | W |
| TFL1L | 42 | 21 | 11 | 118 | 9 | 52 | 18 | 38 | 12 | 18 |
| TFL2.5L | 56 | 33 | 16 | 145 | 13 | 78 | 27 | 58 | 17 | 22 |
| TFL4L | 76 | 39 | 19 | 177 | 14.5 | 88 | 35 | 68 | 20 | 26 |
| TFL6L | 90 | 43 | 21 | 197 | 15 | 108 | 45 | 84 | 22 | 30 |
| TFL10L | 112 | 57 | 25 | 238.5 | 19 | 135 | 55 | 106 | 30 | 36 |
| TFL16L | 137 | 78 | 32 | 285 | 20 | 182 | 72 | 135 | 40 | 50 |
| Model | Q | h(MIN) | A | B | C | D | PT |
| TFL1L | M8 | 20 | 50 | 59 | 9 | 21.5 | 1/8 |
| TFL2.5L | M10 | 30 | 50 | 78 | 15 | 10 | 1/4 |
| TFL4L | M12 | 30 | 60 | 93.5 | 15 | 15 | 1/4 |
| TFL6L | M14 | 35 | 60 | 99 | 24 | 16 | 1/4 |
| TFL10L | M18 | 40 | 55 | 121 | 30.5 | 25 | 3/8 |
| TFL16L | M24 | 40 | 62 | 156.5 | 30.5 | 77 | 3/8 |
Relative Product: